Product Family Datasheet
XC Curtain Wall · 2 models
Specifications and dimensions for all models on this product page.
Preview Datasheet
Manufacturer product detail photograph. The source shows a section of the luminaire; the envelope schematic gives the listed model dimensions.
Third Generation · XC Curtain Wall
Two curtain-wall profiles with different face and cable-channel constructions.
XC I and XC II are two distinct curtain-wall linear-light constructions. XC I includes an integrated cable channel; XC II uses a curved face without a cable channel. Compare their listed profiles against the actual façade section before choosing a model.
Project support: Share the model, mounting detail, light requirements and project supply.
Features & Specifications
Profile dimensions and electrical options below follow the selected model.
XC I combines a curtain-wall profile with an integrated cable channel. XC II uses a wider, lower curved-face form without that channel.
The two constructions meet different envelope and cable-routing needs at a facade detail. Use the selected profile as the basis for the fixing arrangement.
Both are listed at one meter long, but their power and output differ. Keep the complete model code with the intended light and control configuration.
XC Curtain Wall / OPTICS
XC I and XC II have a nominal 120° beam for curtain-wall lighting. Both offer white, RGB and RGBW versions. White-light options include 2700 K, 3000 K, 3500 K and 4000 K, with single colours on request.
BEAM GEOMETRY
Nominal beam schematic
REFERENCE PHOTOMETRY
Listed beam angle: 120°. Request photometric data for your selected model.
Technical Documents
Product specifications and technical files for your lighting project.
XC Curtain Wall · 2 models
Specifications and dimensions for all models on this product page.
Preview DatasheetProject-specific documentation
IES / LDT photometric files, installation guidance and CAD drawings can be requested from our product selection team.
Request Technical FilesBrowse available certificates and check the product and model scope in each document.
FAQ
Practical questions about installation planning, samples and project specification.
No. Fit depends on the actual section, supporting construction and access requirements. Send the relevant façade section and request a model-specific installation review.
Provide a separate cable route and connection-access detail for review. XC II is listed without a cable channel, so the wiring arrangement should not be copied from XC I.
No structural replacement role is established in the supplied data. Treat the luminaires as lighting products and have the supporting and fixing arrangement reviewed for the façade system.
Both list 1000 mm lengths, but XC I is 45 × 50 mm while XC II is 71 × 28 mm. Their channel constructions differ, so compare the actual drawings and connection-access details.
The facade designer should review the selected model’s fixing detail, support, weather interfaces and access for that particular curtain-wall system. The lighting fixture is not a substitute for a structural member.
Review fixture alignment, end joints, viewing angle and the position of connections in the proposed facade section. Confirm the installed appearance with an appropriate sample if continuity is critical.
Provide the curtain-wall section, exact XC model, quantities, cable routes and access plan. Request the matching mounting and electrical documents for review before construction.
PROJECT SUPPORT
Share the selected model, required quantity, installation detail and lighting requirements. Include the supply and control information for a model-specific review.
CURRENT SELECTION · Selected Model: CAL-XC24-I-M1-C1
Our team will review your model, requested configuration and installation requirements, then follow up with the available options.