Product Family Datasheet
HL Slim-Width · 2 models
Specifications and dimensions for all models on this product page.
Preview DatasheetHL Series · HL Slim-Width
24 mm-wide single-row housings with two body heights.
HL Slim-Width combines a 24 mm body width with single-row optics for facade details where fixture space is limited. Choose between the 18 mm-high HL-XQ-2418 body and the 30 mm-high HL-XQ-2430 body, then review the bracket clearance for your installation.
Project support: Share the model, mounting detail, light requirements and project supply.
Features & Specifications
Specifications for the selected model: HL-XQ-2418.
HL Slim-Width uses a 24 mm-wide, single-row housing for facade details with limited fixture space. Its two models differ in body height and installation envelope.
Model-Specific Optics. A printed glass face with round apertures defines the visible optic. Choose the beam and light color for the surface being lit, then position the fixture around the available space.
Mounting Detail. The mounting arrangement differs by model and may include a flat clip or adjustable bracket. Allow for that assembly when setting the finished line.
Model comparison
| Model |
|
|
|---|---|---|
| Body dimensionsL × W × H | 995 × 24 × 18 mm | 995 × 24 × 30 mm |
| Overall heightIncluding mounting | 43 mm | 32 mm (flat clip); 55 mm (adjustable bracket) |
| Mounting options | Adjustable Bracket | Adjustable Bracket / flat clip |
| Kit weightNot fixture net weight | 1.48 kg | 1.54 kg |
OPTICAL OPTIONS
Explore illustrative beam effects for a slim linear wall washer.
Beam effects are illustrative. Actual results depend on the product specifications and installation conditions. Custom beam angles are available upon request.
Technical Documents
Product specifications and technical files for your lighting project.
HL Slim-Width · 2 models
Specifications and dimensions for all models on this product page.
Preview DatasheetProject-specific documentation
IES / LDT photometric files, installation guidance and CAD drawings can be requested from our product selection team.
Request Technical FilesBrowse available certificates and check the product and model scope in each document.
FAQ
Practical answers about this product group, its model options and installation references.
Both models have 24 mm-wide bodies and 12 W / 15 W power options. HL-XQ-2418 has an 18 mm body height; HL-XQ-2430 has a 30 mm body height and offers adjustable-bracket or flat-clip mounting.
The drawings show 43 mm for HL-XQ-2418. HL-XQ-2430 measures 32 mm with the flat clip or 55 mm with the adjustable bracket. These installed heights are separate from the body height.
The 2000–6500 K listing is a factory-customizable white-light range, not a tunable-white function. Specify the required CCT when ordering.
HL-XQ-2418 and HL-XQ-2430 can be considered for window ledges and facade edges with limited width. Compare the full installed height and fixing method with the available recess; the 24 mm dimension describes body width, not luminaire length.
Consider the wall height, setback and sightlines from occupied areas. Confirm the chosen model and optic and review applicable measured photometry before fixing the aiming direction.
No. Ledge geometry, setback, beam distribution and the desired uniformity affect spacing. Use the selected configuration in a lighting calculation or a representative site mock-up.
Provide wall dimensions, ledge clearance, desired white CCT or color, quantity and cable route. Request the model-specific mounting drawing and available optical data before final selection.
PROJECT SUPPORT
Share your facade drawing, selected model and requested options. Include the mounting position and required white CCT where applicable.
CURRENT SELECTION · Selected Model: HL-XQ-2418
Our team will review your model, requested configuration and installation requirements, then follow up with the available options.
