Start a Project

Request a Quote.

C Series · C Patriot

C Patriot Architectural LED Floodlights

Three models from 12–144 W for architectural lighting

Explore Patriot I, II and III as three segmented, fan-shaped fixture formats within the C range. Compare their own specifications and product references before choosing a configuration for your architectural lighting proposal.

Power
48–144 W (Customizable)
Maximum Luminous Flux
9,360 lm
LED Quantity
72 pcs
Size
Head: 318.86 × 138.72 mm
Model3 models

Project support: Review the model, beam, light colour and control for your installation.

Features & Specifications

C Patriot Features & Specifications

Power, output and dimensions below follow the selected model.

Segmented Patriot Head

C Patriot has a visibly segmented light head in three model sizes. This housing form distinguishes the group from the other C Series floodlights.

Select the complete fixture size and power listing for the intended mounting position. The optical choice should match the surfaces and viewing angles in the layout.

The segmented appearance describes the product form; any requirement for separate aiming or control should be stated as a project-specific configuration request.

Performance & Optics

Power48–144 W (Customizable)
Maximum Luminous Flux9,360 lm
Maximum Luminous Efficacy65 lm/W
LED Quantity72 pcs
Beam Angles8° · 12° · 25° · 45° · 60° · 10° × 45° · 15° × 60°

Light & Control

Color Temperature (CCT)2700–6000 K (factory-set; specify when ordering)
Light ColorWhite / Red / Green / Blue / Amber / RGB / RGBW
Control OptionsDMX512 · Wireless DMX · ON/OFF
Housing FinishJet Black · Signal White · Anthracite Grey · White Aluminium · Custom colours on request
Warranty5 years
Service Life50,000 h

Mechanical & Electrical

DimensionsHead: 318.86 × 138.72 mm
IP RatingIP66
IK RatingIK10
Input VoltageAC85–265V · 50–60Hz
Operating Temperature−40 °C to +50 °C

Model Comparison

Compare C Patriot Models

Compare the listed model differences, then use the corresponding installation reference. The model table is not a project lighting calculation.

Specification
Power48–144 W (Customizable)24–72 W (Customizable)12–36 W (Customizable)
Maximum Luminous Flux9,360 lm4,680 lm2,340 lm
LED Quantity72 pcs36 pcs18 pcs
DimensionsHead: 318.86 × 138.72 mmHead: 315.1 × 102.2 mmHead: 205.25 × 91.73 mm

Model Selection Guide

Patriot I

Review Patriot I as its own fixture format. Use the listed model data and request the matching installation documentation.

Patriot II

For Patriot II, compare the complete head arrangement and proposed mounting space without assuming segment-level functions.

Patriot III

Review Patriot III with the target and mounting position shown in the brief. Confirm the exact configuration rather than extending claims from another Patriot format.

Optical Options

C Patriot Beam Angles & Light Distribution

Compare circular and elliptical beam shapes for C Patriot LED floodlights. View horizontal projection at 0° and estimated coverage at 10 m.

25° H × 25° VMedium · Circular distribution
Horizontal beam angle H25°
Vertical beam angle V25°

Target view

Equal scale · H / V
Illustrative beam footprint: 4.43 m wide × 4.43 m high at 10 m.

Perpendicular target plane · Beam shape illustration

Horizontal projection

Side view
Coverage at 10 mEstimated at nominal beam angles
Horizontal width≈ 4.43 m
Vertical height≈ 4.43 m

Beam shapes and dimensions are illustrative, not measured photometric data. Actual results depend on the selected optics, luminaire configuration, and installation conditions.

Technical Documents

Technical Documents

Product specifications and technical files for your lighting project.

Product Family Datasheet

C Patriot · 3 models

Specifications and dimensions for all models on this product page.

Preview Datasheet

Need More Technical Files?

Project-specific documentation

IES / LDT photometric files, installation guidance and CAD drawings can be requested from our product selection team.

Request Technical Files

FAQ

C Patriot Frequently Asked Questions

Questions about C Patriot model selection, configuration boundaries and the references needed before specification.

How should Patriot be evaluated for an architectural feature?

Patriot has a segmented head design. Check the intended target, fixing arrangement and required coverage using the selected model’s optical information; the visible segments alone do not prove a particular beam distribution.

How do Patriot I, II and III differ?

The three models have different head dimensions and listed power ranges. Compare the actual configuration, mounting drawing and output needs rather than selecting solely from the number of visible segments.

Can the segmented form be treated as independently aimed modules?

Do not infer independent aiming or control from appearance. Confirm the mechanical and electrical arrangement of the selected Patriot model with the project supplier.

How should the optic be matched to the target?

Consider mounting distance, target width and height, and nearby surfaces. Confirm the optic and orientation for the actual configuration and use measured photometry where target illuminance needs verification.

What should the mounting design include?

Check the full assembly drawing, fixing footprint, aiming clearance and suitability of the support. Head dimensions alone do not establish the installation footprint or structural capacity.

What must be checked for color-changing configurations?

Confirm the desired light color with the supply and controller for the selected model. The product data distinguishes electrical versions; availability of a particular combination must be confirmed.

What should accompany a Patriot project request?

Provide the intended model, target geometry, location and quantity together with desired optics and control. Request the applicable drawings and available photometric information for that configuration.

PROJECT SUPPORT

Discuss Your C Patriot Configuration

Identify Patriot I, II or III and share the intended fixture position, target surfaces and scene brief. State any segment-level control or aiming requirement as a question for confirmation, not an assumed feature.

CURRENT SELECTION · Selected Model: Patriot I

HELPFUL INFORMATION

  • Light configuration
  • Control requirement
  • Preferred optic
  • Project drawing or reference image
  • Custom product requirements

CUSTOMIZATION SUPPORT

Project-specific customization can be reviewed based on your requirements, including product configuration, housing finish, control method, optics and other feasible modifications.

Our team will review your project information, selected model and customization requirements, then follow up with the available product options.

Request a Quote.

Deutsch