Start a Project

Request a Quote.

D Series · D Compact

D Compact Architectural LED Floodlights

Three models from 6–24 W for architectural lighting

Review D65, D85 and D110 as the smaller round, finned housings in the D range. Compare each model with the standard or hood drawing appropriate to the proposed installation.

Power
6–9 W (Customizable)
Maximum Luminous Flux
585 lm
LED Quantity
3 pcs
Dimensions Without Hood
Single-side: Ø66 × L80 × H93 mm; U-bracket: Ø66 × L80 × H97 mm
Model3 models

Project support: Review the model, beam, light colour and control for your installation.

Features & Specifications

D Compact Features & Specifications

Power, output and dimensions below follow the selected model.

Small Round D Fixtures

D Compact groups three smaller round floodlight housings with visible fins. The compact forms support directional lighting at selected architectural details.

Hood Options
Choose the model by its complete housing envelope and listed optical options. Standard and hood forms require their own installation clearance.

Position the fixture with the target surface and viewing direction in mind. The fins describe the housing form, not a separate performance rating.

Performance & Optics

Power6–9 W (Customizable)
Maximum Luminous Flux585 lm
Maximum Luminous Efficacy65 lm/W
LED Quantity3 pcs
Beam Angles10° · 15° · 30° · 45° · 65° · 10° × 60° · 20° × 40° · 20° × 60°

Light & Control

Color Temperature (CCT)2700–6000 K (factory-set; specify when ordering)
Light ColorWhite / Red / Green / Blue / Amber / RGB / RGBW
Control OptionsDMX512 · Wireless DMX · ON/OFF
Housing FinishJet Black · Signal White · Anthracite Grey · White Aluminium · Custom colours on request
Warranty5 years
Service Life50,000 h

Mechanical & Electrical

Dimensions Without HoodSingle-side: Ø66 × L80 × H93 mm; U-bracket: Ø66 × L80 × H97 mm
Dimensions With HoodSingle-side: Ø66 × L100 × H93 mm; U-bracket: Ø66 × L96 × H97 mm
IP RatingIP66
IK RatingIK10
Input VoltageAC85–265V · 50–60Hz
Operating Temperature−40 °C to +50 °C
MaterialsADC12 aluminum alloy + weather-resistant silicone gasket + tempered glass

Model Comparison

Compare D Compact Models

Compare the listed model differences, then use the corresponding installation reference. The model table is not a project lighting calculation.

Specification
Power6–9 W (Customizable)9–12 W (Customizable)12–24 W (Customizable)
Maximum Luminous Flux585 lm780 lm1,560 lm
LED Quantity3 pcs3 pcs12 pcs
Dimensions Without HoodSingle-side: Ø66 × L80 × H93 mm; U-bracket: Ø66 × L80 × H97 mmØ85 × L96 × H120 mmØ110 × L119 × H153 mm
Dimensions With HoodSingle-side: Ø66 × L100 × H93 mm; U-bracket: Ø66 × L96 × H97 mmØ85 × L127 × H120 mmØ110 × L148 × H151 mm

Model Selection Guide

D65

For D65, review the exact drawing version and proposed fixture position before specifying the model.

D85

Compare D85 with the adjacent compact housings using its own dimensions and listed output.

D110

Review D110 with the intended standard or hood version, rather than transferring a reference from another D group.

Optical Options

D Compact Optical Distribution

Compare circular and elliptical beam angles for D Compact LED floodlights. View horizontal projection at 0° and estimated beam coverage at 10 m.

30° H × 30° VMedium · Circular distribution
Horizontal beam angle H30°
Vertical beam angle V30°

Target view

Equal scale · H / V
Illustrative beam footprint: 5.36 m wide × 5.36 m high at 10 m.

Perpendicular target plane · Beam shape illustration

Horizontal projection

Side view
Beam coverage at 10 mEstimated at nominal beam angles
Horizontal width≈ 5.36 m
Vertical height≈ 5.36 m

Beam shapes and dimensions are illustrative, not measured photometric data. Actual results depend on the selected optics, luminaire configuration, and installation conditions.

Technical Documents

Technical Documents

Product specifications and technical files for your lighting project.

Product Family Datasheet

D Compact · 3 models

Specifications and dimensions for all models on this product page.

Preview Datasheet

Need More Technical Files?

Project-specific documentation

IES / LDT photometric files, installation guidance and CAD drawings can be requested from our product selection team.

Request Technical Files

FAQ

D Compact Frequently Asked Questions

Questions about D Compact model selection, configuration boundaries and the references needed before specification.

Where can D Compact floodlights be used?

D65, D85 and D110 can be considered for columns, entrances and smaller architectural details. Check the size of the feature, the available fixing location and the desired coverage before choosing a model and optic.

How do D65, D85 and D110 differ?

The listed power ranges are 6–9 W, 9–12 W and 12–24 W respectively. Their housings and maximum listed outputs also differ. Compare the actual electrical configuration and dimension drawing, not the model name alone.

When should I compare D Compact with D Standard?

Start with D Compact where the available mounting space and lighting target are small. D Standard offers larger models, beginning with D130. Check the required output, distribution and fixing space for the actual installation before selecting either group.

How should I light a column or entrance without excessive glare?

Choose the optic for the target geometry and mounting position, then consider aiming and observer sightlines. Confirm whether a compatible glare-control accessory is available for the selected model; a hood reference image alone does not establish what is supplied.

Which D65 drawing should an installer use?

D65 has single-side and U-bracket drawing arrangements with different overall heights. Confirm the bracket version, fixing footprint and aiming clearance against the drawing for the ordered configuration before preparing the mounting surface.

What outdoor protection should be confirmed?

Check the IP and impact ratings and the electrical connection requirements for the exact D Compact configuration and site. Ratings do not replace suitable installation, sealing or maintenance procedures.

What should I specify for a D Compact inquiry?

Provide the model or available space, quantity, target and mounting position, desired light color and control method. Ask for the dimensioned drawing and confirmation of optics, finish and accessories for the proposed configuration.

PROJECT SUPPORT

Discuss Your D Compact Configuration

Send the D Compact model, intended drawing version and fixture location. Include the target details, viewing directions and any restrictions around the fixing space.

CURRENT SELECTION · Selected Model: D65

HELPFUL INFORMATION

  • Light configuration
  • Control requirement
  • Preferred optic
  • Project drawing or reference image
  • Custom product requirements

CUSTOMIZATION SUPPORT

Project-specific customization can be reviewed based on your requirements, including product configuration, housing finish, control method, optics and other feasible modifications.

Our team will review your project information, selected model and customization requirements, then follow up with the available product options.

Request a Quote.

Deutsch