Start a Project

Request a Quote.

CH Series · Architectural Pixel Lighting

Rectangular LED Pixel Lights

CH Series · 2 model options

CH rectangular LED pixel lights pick out floor edges and columns in short lines of light. A compatible video controller can drive rows of addressable CH nodes as a media façade. We offer custom housing colours, power ratings per node and node spacing.

Input voltage
DC 12 V
Rated power per node
1 W
LEDs per node
3
Model2 models

Project selection: Specify the light colour and control option when ordering.

Features & Specifications

CH Features & Technical Specifications

Compare the CH3 and CH6 models by housing size, LED count and DC supply.

Rectangular Nodes for Architectural Details

CH rectangular nodes form short dashes along façade joints, columns and canopy edges. Align the long side of each node with the architectural detail.

CH3 contains three LEDs per node and operates at 12 V DC. CH6 contains six LEDs per node and uses a 24 V DC supply.

Use a fixed colour to mark an edge, or specify addressable control for a chase that runs up a column and along a canopy.

Electrical & Optical

Selected modelCDL-CH3-M1-C1
Input voltageDC 12 V
Rated power per node1 W
LEDs per node3
Beam Angle120°

Light & Control

Light ColourWhite / RGB / RGBW / Single Colour
Control OptionsSPI (TTL) / DMX512 / ON/OFF
Node Density5 / 6 / 8 / 10 points per metre; project customisation available
Connection MethodSignal daisy-chaining and multiple connection paths; wiring depends on the control-system configuration
Warranty5 years

Structure & Installation

IP RatingIP67
IK RatingIK10
Housing MaterialPC
Overall Dimensions (L × W × H)65 × 23 × 22.7 mm
Mounting Channel Dimensions (W × H)31 × 30 mm
Upper fixture span in channel drawing15 mm upper fixture span

Model Comparison

Compare CH Series Models

Compare the differences that affect selection. Shared light, control and protection listings appear in the full specification above.

Specification
Input voltageDC 12 V 24 V DC
Rated power per node1 W 1.5 W
LEDs per node3 6
Overall Dimensions (L × W × H)65 × 23 × 22.7 mm 75 × 34.2 × 22.7 mm
Housing width · 28 mm
Mounting base width · 34.2 mm
Mounting Channel Dimensions (W × H)31 × 30 mm 36.5 × 30 mm

CH SERIES OPTICS

Rectangular Pixel Light Distribution

Follow a canopy edge or a vertical façade joint with our CH rectangular pixels. Each node forms a short dash of light, and the spacing sets the gap between dashes.

Beam angle
120°
Viewing angle
180°

BEAM GEOMETRY

Beam Diagram

120 degree nominal beam angle Schematic cross-section of a rectangular pixel node, with 60 degrees on each side of the centre axis. Not a measured intensity curve. 60° 60° 120° Nominal beam angle

Schematic cross-section

For your canopy or façade detail, ask our lighting team for photometric data for the CH model and light colour you plan to use.

Request Photometric Data

Technical Documents

Technical Documents

Product specifications and technical files for your lighting project.

Product Family Datasheet

Rectangular LED Pixel Lights · 2 models

Specifications and dimensions for all models on this product page.

Preview Datasheet

Need More Technical Files?

Project-specific documentation

IES / LDT photometric files, installation guidance and CAD drawings can be requested from our product selection team.

Request Technical Files

FAQ

CH Series Frequently Asked Questions

Selection, mounting, supply, control and technical information for rectangular LED pixel lights.

When should I consider rectangular LED pixel lights?

Consider CH where an elongated light-point shape suits the architectural detail or repeated pattern. Compare the two body drawings and channel sections with the available mounting space rather than assuming that a rectangular shape provides a different beam angle.

What is the difference between CH3 and CH6?

CH3 has three LEDs per node and is rated at 1 W on 12 V DC. CH6 has six LEDs per node and is rated at 1.5 W on 24 V DC. Their housings and mounting channels also differ in size.

How should I compare the CH fixture and channel sizes?

The CH3 drawing labels 65 × 23 mm plan-view spans and a 31 × 30 mm channel section. The CH6 housing is 28 mm wide. With its mounting base, the node measures 75 × 34.2 × 22.7 mm (L × W × H). The aluminium mounting channel measures 36.5 × 30 mm (W × H).

Is a row of CH nodes a continuous linear luminaire?

No. CH comprises individual rectangular light points. The perceived line depends on node spacing, viewing position and mounting detail, so review the proposed layout or a representative mock-up.

How should rectangular nodes be oriented on a facade?

Coordinate the long axis with the desired architectural pattern and check the selected CH3 or CH6 mounting drawing and channel. The housing shape does not itself establish a different beam distribution.

Can CH nodes use any controller for media content?

No. Confirm the selected color and control configuration, addressing, mapping and controller compatibility for the full system. Video or animation capability cannot be inferred from the node shape.

What should be included in a CH layout inquiry?

Provide the exact model, point count, intended orientation and spacing, viewing positions, supply and control. Request the matching drawings and configuration-specific wiring and load information.

Project Support

Discuss Your CH Series Pixel Lighting Layout

Share the model, light-point quantity, mounting detail and intended architectural pattern. Include the supply, control system and desired colour so the configuration can be reviewed together.

CURRENT SELECTION · Selected Model: CDL-CH3-M1-C1

Helpful Information

  • Façade elevation or mounting detail
  • Light-point quantity and desired spacing
  • Model supply voltage
  • Light colour and control requirement
  • Cable route and connection constraints

Request a Quote.

Deutsch