Start a Project

Request a Quote.

FD Series · Architectural Pixel Lighting

Square LED Pixel Lights

FD Series · 3 model options

FD square LED pixel lights align with cladding joints and façade grids. Pair an addressable grid with a compatible video controller to display graphics and video. We can match the housing colour to the cladding and tailor the rated power and spacing of the nodes.

Input voltage
DC 5 V
Rated power per node
0.3 W
LEDs per node
1
Model3 models

Project selection: Specify the light colour and control option when ordering.

Features & Specifications

FD Features & Technical Specifications

Compare FD node dimensions and electrical specifications for your façade layout.

Square Pixel Nodes for Façade Grids

FD square nodes align with cladding joints to form pixel grids on retail façades and entrance soffits.

The three models offer one, three or six LEDs per node. FD1 operates at 5 V DC, FD3 at 12 V DC and FD6 at 24 V DC.

An addressable FD grid can display lettering and moving graphics with a compatible controller. Node pitch and viewing distance determine how much detail is visible.

Electrical & Optical

Selected modelCDL-FD1-M1-C1
Input voltageDC 5 V
Rated power per node0.3 W
LEDs per node1
Beam Angle120°

Light & Control

Light ColourWhite / RGB / RGBW / Single Colour
Control OptionsSPI (TTL) / DMX512 / ON/OFF
Node Density5 / 6 / 8 / 10 points per metre; project customisation available
Connection MethodSignal daisy-chaining and multiple connection paths; wiring depends on the control-system configuration
Warranty5 years

Structure & Installation

IP RatingIP67
IK RatingIK10
Housing MaterialPC
Overall Dimensions (L × W × H)42 × 35 × 23.8 mm
Mounting Channel Dimensions (W × H)36.5 × 30.1 mm
Upper fixture span in channel drawing20 mm upper fixture span

Model Comparison

Compare FD Series Models

Compare the differences that affect selection. Shared light, control and protection listings appear in the full specification above.

Specification
Input voltageDC 5 V DC 12 V 24 V DC
Rated power per node0.3 W 1 W 1.5 W
LEDs per node1 3 6
Overall Dimensions (L × W × H)42 × 35 × 23.8 mm 50 × 38 × 24.5 mm 56.2 × 43.6 × 23.8 mm
Mounting Channel Dimensions (W × H)36.5 × 30.1 mm 45.5 × 30 mm 51.2 × 30 mm

FD SERIES OPTICS

Square Pixel Light Distribution

Arrange our FD square pixels in rows and columns for a media façade. With pixel control, the grid can display lettering, graphics and video.

Beam angle
120°
Viewing angle
180°

BEAM GEOMETRY

Beam Diagram

120 degree nominal beam angle Schematic cross-section of a square pixel node, with 60 degrees on each side of the centre axis. Not a measured intensity curve. 60° 60° 120° Nominal beam angle

Schematic cross-section

Planning a media façade? Send us your FD model and light colour for the matching photometric data.

Request Photometric Data

Technical Documents

Technical Documents

Product specifications and technical files for your lighting project.

Product Family Datasheet

Square LED Pixel Lights · 3 models

Specifications and dimensions for all models on this product page.

Preview Datasheet

Need More Technical Files?

Project-specific documentation

IES / LDT photometric files, installation guidance and CAD drawings can be requested from our product selection team.

Request Technical Files

FAQ

FD Series Frequently Asked Questions

Selection, mounting, supply, control and technical information for square LED pixel lights.

How do the three square LED pixel light models differ?

FD1, FD3 and FD6 use one, three and six LEDs per node respectively. Their rated loads are 0.3 W, 1 W and 1.5 W per node. Each model has its own housing and mounting dimensions.

Are the square body and aluminium channel the same dimensions?

No. The product drawing includes the body and mounting features; the aluminium-channel drawing labels the channel width and height separately from the upper fixture span. Use both drawings when reviewing the façade detail rather than treating a channel dimension as the fixture size.

Which supply voltage does each FD model require?

Use 5 V DC for FD1, 12 V DC for FD3 and 24 V DC for FD6.

How can FD square nodes be arranged on a building?

A square-node grid can follow architectural lines where the mounting and wiring detail allows. Select pitch using the facade geometry, viewing distance and desired visual detail; square shape alone does not guarantee higher resolution.

Does the FD viewing angle specify the optic?

The data lists a 120° beam angle and a separate 180° viewing angle. They describe different quantities; request configuration-specific photometry rather than treating them as interchangeable.

What determines animation or video capability?

Confirm the chosen pixel configuration, addressing, compatible controller, mapping and content system for the entire installation. A static on/off configuration should not be assumed to support individually mapped effects.

What should an FD project request include?

Send the model, grid dimensions, node quantities, desired spacing, supply and control requirements. Request the model and channel drawings and a system-specific wiring and load review.

Project Support

Discuss Your FD Series Pixel Lighting Layout

Share the model, light-point quantity, mounting detail and intended architectural pattern. Include the supply, control system and desired colour so the configuration can be reviewed together.

CURRENT SELECTION · Selected Model: CDL-FD1-M1-C1

Helpful Information

  • Façade elevation or mounting detail
  • Light-point quantity and desired spacing
  • Model supply voltage
  • Light colour and control requirement
  • Cable route and connection constraints

Request a Quote.

Deutsch