Product Family Datasheet
R Large · 2 models
Specifications and dimensions for all models on this product page.
Preview DatasheetR Series · R Large
Two large models with customizable power options
Compare R260 and R300, the two larger cylindrical housings in the R range. Review the references available for each mounting version before developing the installation detail.
Project support: Review the model, beam, light colour and control for your installation.
Features & Specifications
Power, output and dimensions below follow the selected model.
R Large contains two cylindrical floodlight models with distinct housing and support dimensions. The complete assembly is relevant to architectural mounting positions.
Choose the model and mounting version together so the required clearance and fixture orientation can be assessed as one detail.
Select the beam for the intended surface and viewing direction. A larger cylinder does not, by itself, specify the reach of the lighting effect.
Model Comparison
Compare the listed model differences, then use the corresponding installation reference. The model table is not a project lighting calculation.
| Specification | ||
|---|---|---|
| Power | 100 W / 120 W / 150 W (Customizable) | 120 W / 150 W / 200 W (Customizable) |
| Maximum Luminous Flux | 9,750 lm | 13,000 lm |
| LED Quantity | 18, 20, 28, 48 or 60 LEDs | 24, 36, 60 or 72 LEDs |
| Lens Diameter | Ø45, Ø37 or Ø24 mm | Ø45, Ø37 or Ø24 mm |
| LED Options | 3535 LED Cree XLamp XP-E OSRAM 3535 RGBW | 3535 LED Cree XLamp XP-E OSRAM 3535 RGBW |
| Base Mount Dimensions | Ø283.8 × H350 mm | Ø325.5 × H367 mm |
| U-Bracket Dimensions | Ø284 × D218.69 × H330 mm | Ø325 × D230 × H394 mm |
For R260, check which mounting drawings are available. If the proposed version lacks a dimensional reference, request it before finalising the fixing detail.
Review R300 with the base or U-bracket drawing appropriate to the intended installation. Keep the selected version explicit in the project schedule.
Optical Options
Compare circular and elliptical beam angles for R Large LED floodlights. View horizontal projection at 0° and estimated beam coverage at 10 m.
Perpendicular target plane · Beam shape illustration
Beam shapes and dimensions are illustrative, not measured photometric data. Actual results depend on the selected optics, luminaire configuration, and installation conditions.
Technical Documents
Product specifications and technical files for your lighting project.
R Large · 2 models
Specifications and dimensions for all models on this product page.
Preview DatasheetProject-specific documentation
IES / LDT photometric files, installation guidance and CAD drawings can be requested from our product selection team.
Request Technical FilesBrowse available certificates and check the product and model scope in each document.
FAQ
Questions about R Large model selection, configuration boundaries and the references needed before specification.
R260 and R300 can be considered for larger architectural features where their cylindrical housings and mounting arrangements fit the site. Confirm the target geometry and required illuminance with the proposed optic and location.
R260 lists 100, 120 and 150 W options; R300 lists 120, 150 and 200 W options. Their housings and listed maximum outputs differ. Compare the actual version and mounting drawing as well as the power option.
R Large uses cylindrical housings and has base and U-bracket references; D Large contains D230 and D300 round-head models. Compare the exact drawings, output and optical configuration for the site rather than assuming one series has a universal performance advantage.
Distance, aiming and distribution affect the light reaching the target. Use the selected configuration’s photometric data and a calculation to assess coverage, target illuminance and fixture quantity; the nominal wattage alone cannot establish a throw distance.
Check the drawing for the selected mounting arrangement, available clearance, access and fixing footprint. The project engineer should confirm that the supporting structure is suitable for the installed assembly and site conditions.
Confirm the exact configuration’s protection rating and installation instructions, including connections and access for maintenance. A rating by itself does not describe the condition of the mounting surface or the completed connection.
Provide the target and mounting drawings, required quantity, desired optical and control configuration, and the preferred base or bracket arrangement. Request applicable dimensions and photometric files for the proposed model and version.
PROJECT SUPPORT
Share R260 or R300, the intended mounting version and the available support space. Request any missing mounting drawing and include target geometry rather than relying on the model size to describe the required effect.
CURRENT SELECTION · Selected Model: R260
Project-specific customization can be reviewed based on your requirements, including product configuration, housing finish, control method, optics and other feasible modifications.
Our team will review your project information, selected model and customization requirements, then follow up with the available product options.