Product Family Datasheet
D Large · 2 models
Specifications and dimensions for all models on this product page.
Preview Datasheet
Original product and dimension references. Confirm the drawing for the required mounting or housing version before installation.
D Series · D Large
Two models from 100–240 W for architectural lighting
Explore D230 and D300, the larger D housings with their own fin and bracket references. Compare the complete fixture drawings and listed specifications for your proposed architectural installation.
Project support: Review the model, beam, light colour and control for your installation.
Features & Specifications
Power, output and dimensions below follow the selected model.
D Large includes two larger round housings with a visible fin and bracket form. Their complete assemblies differ from the smaller D groups.
Hood Options
Choose the model and standard or hood version as one fixture configuration. The required mounting clearance follows that physical selection.
Set the beam and aiming direction against the target geometry. Neither housing size nor fin shape alone defines lighting reach or thermal performance.
Model Comparison
Compare the listed model differences, then use the corresponding installation reference. The model table is not a project lighting calculation.
| Specification | ||
|---|---|---|
| Power | 100–150 W (Customizable) | 150–240 W (Customizable) |
| Maximum Luminous Flux | 9,750 lm | 15,600 lm |
| LED Quantity | 48 pcs | 72 pcs |
| Dimensions Without Hood | Ø230 × L244 × H319 mm | Ø300 × L278 × H394 mm |
| Dimensions With Hood | Ø230 × L334 × H319 mm | Ø300 × L398 × H394 mm |
Review D230 against the proposed supporting surface using the selected drawing version and complete fixture envelope.
Compare D300 with D230 using its own drawing and model data. Do not assume bracket interchangeability from membership of the same group.
Optical Options
Compare circular and elliptical beam angles for D Large LED floodlights. View horizontal projection at 0° and estimated beam coverage at 10 m.
Perpendicular target plane · Beam shape illustration
Beam shapes and dimensions are illustrative, not measured photometric data. Actual results depend on the selected optics, luminaire configuration, and installation conditions.
Technical Documents
Product specifications and technical files for your lighting project.
D Large · 2 models
Specifications and dimensions for all models on this product page.
Preview DatasheetProject-specific documentation
IES / LDT photometric files, installation guidance and CAD drawings can be requested from our product selection team.
Request Technical FilesBrowse available certificates and check the product and model scope in each document.
FAQ
Questions about D Large model selection, configuration boundaries and the references needed before specification.
D230 and D300 can be considered for large architectural targets and landmark lighting. Establish the target size, mounting position and illuminance requirement before deciding whether either model and its available optic fit the project.
D230 lists 100–150 W and an ADC12 aluminum-alloy housing; D300 lists 150–240 W and a magnesium-alloy housing. They have different dimensions. Verify the precise power and construction for the selected version rather than treating the group as one model.
D Large includes D230 and D300, while D Standard covers D130 through D210. Compare their model-specific dimensions, output and available optics with the target and mounting constraints. A larger fixture is not automatically the correct choice.
No. Target illuminance depends on the selected optic, actual output, distance and aiming. A narrower distribution can concentrate light but its suitability must be checked against the target area and configuration-specific photometry.
Use the target geometry, mounting positions, required illuminance and photometric data for the selected configuration in a lighting calculation. Review overlap, aiming and spill light before finalizing the number and positions of fixtures.
Use the approved drawing for the chosen D230 or D300 version to check fixing space and aiming clearance. The project engineer should assess the supporting structure and local wind loads for the installed assembly.
Send the target dimensions, mounting locations, desired effect, quantities and any dynamic color requirements. Request the exact electrical and control configuration, mounting drawing and available photometric files; availability should be confirmed for the chosen version.
PROJECT SUPPORT
Share D230 or D300, the chosen drawing version and the proposed support location. Include the complete fixture clearance, target geometry and intended effect for configuration review.
CURRENT SELECTION · Selected Model: D230
Project-specific customization can be reviewed based on your requirements, including product configuration, housing finish, control method, optics and other feasible modifications.
Our team will review your project information, selected model and customization requirements, then follow up with the available product options.