Start a Project

Request a Quote.

Architectural LED Neon Flex

Side-Bend LED Neon Flex

Three cross-sections for side-bending architectural lines

Plan curved outlines in the side-bending plane with NFA-series LED neon flex. Choose a narrow 4 × 10 mm section, a 10 × 10 mm square profile or a taller 10 × 20 mm section, using the actual bend and fixing details to guide selection.

Profile Cross-Section (W × H)
4 × 10 mm
Input Voltage
24 V DC
Power
8 W/m
Model & Profile3 models

Features & Specifications

Side-Bending Geometry for Curved Outlines

Profile dimensions and bend limits follow the selected model.

Side-Bending Profile Choices

The NFA profiles bend in the side plane and offer three different cross-sections. The narrow NFA0410 can follow a tighter listed curve than the two taller profiles.

Cable-exit choices depend on the model. NFA0410 shows a side exit, while NFA1010 and NFA1020 also show bottom and end exits.

Choose the exit and fixing route together so the cable and mounting components fit the proposed architectural line.

Electrical & White Light

Input Voltage24 V DC
Power8 W/m
Luminous Flux (White, 3000 K)130 lm/m
Light ConfigurationsWhite / Duo (2700 / 6500 K) / RGB / RGBW
Color Temperature (CCT)1800 / 2400 / 2700 / 3000 / 4000 / 5000 / 6500 / 7500 K
CRI (White)>90 (white)

Profile & Bending

Profile Cross-Section (W × H)4 × 10 mm
Bending DirectionSide Bending
Minimum Bending RadiusR60 mm
Maximum Connected Length (24 V)5 m
Cable Exit OptionsSide

Environment & Installation

IP RatingIP65
Operating Temperature−20 °C to +45 °C
Mounting OptionsAluminium channel
Control Options0–10 V / DALI / DMX512 (via compatible control equipment)

Model Comparison

Compare Side-Bend Models

White-light reference values. Compare the profile and bend limits before selecting the colour configuration.

ModelProfile / IPPower / Luminous Flux (White, 3000 K)Min. bend radius / max. run
4 × 10 mm · IP658 W/m · 130 lm/mR60 mm · 5 m
10 × 10 mm · IP6710 W/m · 400 lm/mR150 mm · 5 m
10 × 20 mm · IP6714 W/m · 500 lm/mR150 mm · 5 m

Light Configuration

Side-Bend LED Neon Flex Colour & CCT Options

Explore White, Duo, RGB and RGBW options for NFA0410, NFA1010 and NFA1020. Compare the illustrated appearance for signs and architectural outlines that follow a side-bending path. All three models have a fixed 120° beam angle.

Product & profileLED neon flex colour preview · Illustration only
NFA04104 × 10 mm
Preparing product preview…
Continuous luminous surface

Drag to rotate · Scroll to zoom · Based on profile dimensions

PROFILE · W × H
4 × 10 mm
CUTTING INTERVAL
50 mm
CRI · WHITE
Ra >90

LIGHT CONFIGURATION

Choose Your Light Colour

NFA0410

Select a light configuration, then explore its colour or CCT options for the model shown.

120°Beam angle

Shared by all three profiles.
Standard beam angle.

Single CCT
CCT · order selection3000 K

White uses a fixed CCT; Duo offers 2700 / 6500 K dual white. RGB provides colour effects, while RGBW adds a white channel.

Illustrative LED neon flex colour preview. Screen appearance may differ from the finished product; this preview does not represent measured light distribution or illuminance.

Technical Documents

Technical Documents

Product specifications and technical files for your lighting project.

Product Family Datasheet

Side-Bend LED Neon Flex · 3 models

Specifications and dimensions for all models on this product page.

Preview Datasheet

Need More Technical Files?

Project-specific documentation

IES / LDT photometric files, installation guidance and CAD drawings can be requested from our product selection team.

Request Technical Files

FAQ

Side-Bend Questions, Answered

Model selection, bending, cable routing and installation planning.

Can I substitute a top-bend strip of the same size?

Not solely because the dimensions match. Side-bend and top-bend products are designed for different bending planes. Check the emitting face and direction diagram against the intended mounting orientation.

How does NFA0410 differ from NFA1010?

NFA0410 is 4 × 10 mm, IP65 and R60 mm, with a listed side cable exit. NFA1010 is 10 × 10 mm, IP67 and R150 mm, with bottom, side and end cable exits.

Is the 5 m figure the roll length?

No. It is the listed maximum connection run for the standard 24 V product. Packaging length is not specified here. Longer architectural routes need a planned feed arrangement.

Where can Side-Bend neon flex be considered?

Use it where the intended architectural curve follows the side-bending plane shown on the selected model’s diagram. Confirm the emitting face and the actual mounting orientation before installation.

Does the minimum radius apply to every side-bend profile?

No. Bend limits are model-specific; the listed NFA0410 and NFA1010 limits differ. Confirm the selected model’s diagram and radius, and do not confuse radius with diameter.

What should be verified after a site cut?

Confirm the approved cut unit, connector and sealing procedure for the exact configuration. The factory IP rating does not automatically prove the protection of a field-made termination.

What information helps review a Side-Bend project?

Provide the model, curve geometry, mounting surface, segment lengths, cable exits and light configuration. Request the matching accessory, electrical and installation information.

Project Support

Discuss Your Side-Bend Neon Flex Layout

Share the installation drawing, profile space and light requirements. Include the route lengths and proposed feed locations so the model and configuration can be reviewed together.

SELECTED MODEL: NFA0410
No light configuration selected

Helpful Information

  • Profile space and bending plane
  • Run lengths and minimum curve radius
  • White CCT or colour configuration
  • Supply, controller and feed locations
  • Cable exit and mounting requirements

Request a Quote.

Deutsch