Start a Project

Request a Quote.

Architectural LED Neon Flex

Three-Side Emitting LED Neon Flex

NF03025R · a 30 × 25 mm multi-face luminous profile

NF03025R uses a three-side emitting profile for architectural details where the illuminated surface remains visible from more than one side. Review the original product view and rounded 30 × 25 mm section before planning an exposed line of light.

Profile Cross-Section (W × H)
30 × 25 mm (rounded)
Input Voltage
24 V DC
Power
25 W/m
Model & Profile1 model

Features & Specifications

A Multi-Face Profile for Exposed Details

Profile dimensions and bending data for NF03025R are shown below.

Three Visible Emitting Faces

NF03025R has an illuminated top and two illuminated sides within a rounded profile. The three emitting faces suit details where the line remains visible from more than one direction.

Its 30 × 25 mm section needs a mounting position that leaves the intended faces exposed. A recess or channel may conceal part of the light-emitting surface.

The listed minimum bend radius and cutting interval govern the route. Plan the curve and feed position around those model-specific limits.

Electrical & White Light

Input Voltage24 V DC
Power25 W/m
Luminous Flux (White, 3000 K)1,920 lm/m
Light ConfigurationsWhite / Duo (2700 / 6500 K) / RGB / RGBW
Color Temperature (CCT)1800 / 2400 / 2700 / 3000 / 4000 / 5000 / 6500 / 7500 K
CRI (White)>90 (white)

Profile & Bending

Profile Cross-Section (W × H)30 × 25 mm (rounded)
Bending DirectionTop and Side Bending
Minimum Bending RadiusR500 mm
Maximum Connected Length (24 V)5 m
Cable Exit OptionsBottom / Side / End
Minimum Cutting Length83.3 mm
Twisting Limit<180°/m

Environment & Installation

IP RatingIP65
Operating Temperature−20 to 45°C
Mounting OptionsAluminum Channel / Bendable Mounting Rail
Control Options0–10 V / DALI / DMX512 (via compatible control equipment)

Light Configuration

Three-Side Emitting LED Neon Flex Colour & CCT Options

Explore White, Duo, RGB and RGBW options for NF03025R. Compare the illustrated appearance for architectural outlines with top and side emission. The listed beam angle is fixed at 120°.

Product & profileLED neon flex colour preview · Illustration only
NF03025R30 × 25 mm (rounded)
Preparing product preview…
Three-side luminous surface

Drag to rotate · Scroll to zoom · Based on profile dimensions

PROFILE · W × H
30 × 25 mm (rounded)
CUTTING INTERVAL
83.3 mm
CRI · WHITE
Ra >90

LIGHT CONFIGURATION

Choose Your Light Colour

NF03025R

Select a light configuration, then explore its colour or CCT options for the model shown.

120°Beam angle

Three-side emission.
NF03025R profile.

Single CCT
CCT · order selection3000 K

White uses a fixed CCT; Duo offers 2700 / 6500 K dual white. RGB provides colour effects, while RGBW adds a white channel.

Illustrative LED neon flex colour preview. Screen appearance may differ from the finished product; this preview does not represent measured light distribution or illuminance.

Technical Documents

Technical Documents

Product specifications and technical files for your lighting project.

Product Family Datasheet

Three-Side Emitting LED Neon Flex · 1 model

Specifications and dimensions for all models on this product page.

Preview Datasheet

Need More Technical Files?

Project-specific documentation

IES / LDT photometric files, installation guidance and CAD drawings can be requested from our product selection team.

Request Technical Files

FAQ

Three-Side Emitting Questions, Answered

Model selection, bending, cable routing and installation planning.

What does three-side emitting mean for NF03025R?

It describes the luminous faces of the profile shown in the original catalogue image. It does not establish a measured viewing angle or independently controllable light sources on each side.

Can this product be installed in a tight curve?

Its minimum bending radius is R500 mm. Use the original bending diagram and maintain the required radius; do not infer a smaller radius from the product photograph.

Does IP65 mean it can be submerged or driven over?

No such use is established by the supplied product information. This page lists IP65, not a submersible or vehicle-load specification. Review the actual installation conditions before ordering.

How does NF03025R differ from a single-face profile?

Its described construction has three luminous faces. Compare the mounting detail and intended viewing directions with a single-face profile; three faces do not establish a measured 270° beam or independently controlled sides.

What mounting detail preserves the visible side faces?

Review the 30 × 25 mm profile with the selected support or channel. A recess can screen a side face, so test the intended view and fixing arrangement before finalizing the detail.

How should the powered segment be specified?

Confirm the exact light configuration, per-metre power, cut unit, feed length and cable exit together. A roll or route length is not automatically an approved single-feed length.

What should a three-side project request include?

Provide the route, bend geometry, visible faces, mounting section, segment lengths and desired light color and control. Request the model-specific bending, connection and electrical documents; confirm RGB or RGBW availability before relying on it.

Project Support

Discuss Your Three-Side Emitting Neon Flex Layout

Share the installation drawing, profile space and light requirements. Include the route lengths and proposed feed locations so the model and configuration can be reviewed together.

SELECTED MODEL: NF03025R
No light configuration selected

Helpful Information

  • Profile space and bending plane
  • Run lengths and minimum curve radius
  • White CCT or colour configuration
  • Supply, controller and feed locations
  • Cable exit and mounting requirements

Request a Quote.

Deutsch