Product Family Datasheet
Top-Bend LED Neon Flex · 3 models
Specifications and dimensions for all models on this product page.
Preview Datasheet
Original model-specific catalogue images. Dimensions in mm; hover or tap a view, then select the main image to enlarge.
Architectural LED Neon Flex
Compact, semicircular and square profiles for top-bending paths
Choose top-bend LED neon flex when the installation follows the bending plane shown in the model drawing. Compare a 6 × 6 mm profile, an 11 × 8.8 mm semicircular section and a 20 × 20 mm square section for the space available.
Features & Specifications
Profile dimensions and bend limits follow the selected model.
Top-Bend Neon Flex offers compact square, semicircular and larger square sections. Each profile follows the top-bending plane shown for its model.
The three minimum bend radii differ, so select the section around the curve as well as the space available for clips or channel mounting.
Protection ratings also vary across the models. The connection and end-seal detail should suit the installation environment and selected profile.
Top-Bend Neon Flex offers compact square, semicircular and larger square sections. Each profile follows the top-bending plane shown for its model.
The three minimum bend radii differ, so select the section around the curve as well as the space available for clips or channel mounting.
Protection ratings also vary across the models. The connection and end-seal detail should suit the installation environment and selected profile.
Top-Bend Neon Flex offers compact square, semicircular and larger square sections. Each profile follows the top-bending plane shown for its model.
The three minimum bend radii differ, so select the section around the curve as well as the space available for clips or channel mounting.
Protection ratings also vary across the models. The connection and end-seal detail should suit the installation environment and selected profile.
48 V customization listed; request the applicable electrical specification.
Model Comparison
White-light reference values. Compare the profile and bend limits before selecting the colour configuration.
| Model | Profile / IP | Power / Luminous Flux (White, 3000 K) | Min. bend radius / max. run |
|---|---|---|---|
| 6 × 6 mm · IP65 | 8 W/m · 380 lm/m | R60 mm · 5 m | |
| 11 × 8.8 mm (semicircular) · IP65 | 10 W/m · 800 lm/m | R100 mm · 5 m | |
| 20 × 20 mm · IP67 | 14 W/m · 600 lm/m | R150 mm · 5 m |
Light Configuration
Explore White, Duo, RGB and RGBW options for NF0606, NF1108 and NF2020. Compare the illustrated appearance for architectural outlines and coves that follow a top-bending path. All three models have a fixed 120° beam angle.
Drag to rotate · Scroll to zoom · Based on profile dimensions
LIGHT CONFIGURATION
Select a light configuration, then explore its colour or CCT options for the model shown.
Shared by all three profiles.
Standard beam angle.
White uses a fixed CCT; Duo offers 2700 / 6500 K dual white. RGB provides colour effects, while RGBW adds a white channel.
Illustrative LED neon flex colour preview. Screen appearance may differ from the finished product; this preview does not represent measured light distribution or illuminance.
Technical Documents
Product specifications and technical files for your lighting project.
Top-Bend LED Neon Flex · 3 models
Specifications and dimensions for all models on this product page.
Preview DatasheetProject-specific documentation
IES / LDT photometric files, installation guidance and CAD drawings can be requested from our product selection team.
Request Technical FilesBrowse available certificates and check the product and model scope in each document.
FAQ
Model selection, bending, cable routing and installation planning.
It describes the permitted bending plane shown in the catalogue, rather than a measured optical beam angle. Check the Bending Direction view before orienting the strip in the installation.
No. NF0606 and NF1108 are listed as IP65, while NF2020 is IP67. Do not apply the NF2020 rating to the smaller models.
For NF2020, white lists 50 mm, while Duo, RGB and RGBW list 62.5 mm. Match the cutting interval to the ordered configuration.
Choose it where the planned architectural curve follows the bending plane shown on the selected model’s diagram. Confirm the emitting face orientation and support detail before fixing the route.
NF0606, NF1108 and NF2020 have different cross-sections and model-specific limits. Compare their drawings, permitted bend radius and cable exits with the available mounting space.
Not merely because two sections appear similar. Their permitted bending planes differ; compare the selected diagrams with the actual route and visible emitting face.
Confirm the maximum feed length and cutting unit for the exact model, voltage and light configuration. Plan accessible connections and restore the specified protection using the approved connection method.
Project Support
Share the installation drawing, profile space and light requirements. Include the route lengths and proposed feed locations so the model and configuration can be reviewed together.
SELECTED MODEL: NF0606
No light configuration selected